Energy monitor/consumption screen
You can view the status of your hybrid system on the multi-information
display
and the navigation system screen.
1. Navigation system screen (if equipped).
2. Multi-information display.
Remote Touch*
1. “MENU” button.
2. Remote Touch knob.
3. “ENTER” button.
*: For use of the Remote Touch, refer to “Navigation System Owner's Manual”.
Energy monitor
- Navigation system (if equipped)
Press the “MENU” button.
Select 
on the
screen
and press the “ENTER” button on
the Remote Touch.
Select 
and press the
“ENTER” button.
If the 
or
screen is displayed, select
and press the “ENTER” button.
- Multi-information display
Toggle the “ENTER” switch on the steering wheel upward or downward through several items to select the energy monitor display.
These images are examples only, and may vary slightly from actual conditions.
Consumption (vehicles with a navigation system)
1. Press the “MENU” button and select
.
2. Select 
and press the “ENTER”
button.
If the 
screen does not appear, select
and
press the “ENTER” button.
1. Fuel consumption in the past 30 minutes.
2. Regenerated energy in the past 30 minutes.
One symbol indicates 50 Wh. Up to 4 symbols are shown.
3. Cruising range.
Past record (vehicles with a navigation system)
1. Press the “MENU” button and select
.
2. Select and push the “ENTER”
button.
If the 
screen does not appear,
select 
and
press the “ENTER” button.
1. Best past fuel consumption.
2. Average fuel consumption.
These images are examples only, and may vary slightly from actual conditions.
Resetting the consumption data
Selecting 
on the
screen will reset the fuel
consumption and
the regenerated energy for the past 30 minutes. Selecting
on the
screen will reset the past records.
Selecting 
will confirm
resetting of all the data (except cruising range).
See also:
Fuel pump shut off system
To minimize the risk of fuel leakage when the engine stalls or an airbag
inflates upon collision, the fuel pump shut off system stops supplying fuel to
the engine.
Follow the procedure below to res ...
PCS (Pre-Collision System)
When the radar sensor detects an unavoidable frontal collision, safety
systems
such as the brakes and seat belts are automatically engaged in an
attempt to lessen damage.
Pre-collision seat belts ...
Checking and replacing fuses
If any of the electrical components do not operate, a fuse may have blown.
If this happens, check and replace the fuses as necessary.
1. Turn the “POWER” switch off.
2. Remove the engine compartmen ...