Bluetooth® audio system setup
System setup items and operation procedures
- Pattern A.
To enter the menu for each function, follow the steps below using a
voice command or 
:
- Pattern B.
1. Press to select “BT•A MENU”.
2. Select “System Setup” using .
3. Select one of the following items using
:
Setting voice guidance volume
“Guidance Vol”.
Displaying the Bluetooth® device address and name “Device Name”.
Initializing the system
“Initialize”.
See also:
Armrest
Pull the armrest down for use.
NOTICE:
To prevent damage to the armrest
Do not place too much strain on the armrest. ...
Outside rear view mirrors
Mirror angle can be adjusted using the switch.
To select a mirror to adjust,
press the switch.
1. Left.
2. Right.
Pressing the same switch again
will put the switch in neutral.
To adjust th ...
If the vehicle becomes stuck
Carry out the following procedures if the tires spin or the vehicle
becomes
stuck in mud, dirt or snow:
1. Stop the hybrid system. Set the parking brake and shift the shift
lever to P.
2. Remove ...